Hijriah: Loading...

Masehi: Loading...

Banda Aceh, Aceh, Indonesia 23111

STUDI ZINK OKSIDA SEBAGAI KOMPOSIT BIOPLASTIK GENUS METROXXLEN, Sp DENGAN METODE MELT INTERCALTION

Authors

  • Khairun Nisah UIN Ar-raniry

DOI:

https://doi.org/10.22373/lj.v7i2.5529

Keywords:

melt intercaltion, zinc oxide, bioplastic, Genus Metroxxlen Sp.

Abstract

Bioplastic is one step to reduce the use of plastics that are not environmentally friendly. The genus Metroxxlen, Sp is a bioplastic material that is easily degraded in the soil. Metroxxlen, Sp has a hydrophilic nature which results in its physical properties being low. Bioplastic Starch Genus Metroxxlen, Sp is made by mixing ZnO as a reinforcement, Genus starch Metroxxlen, Sp as a source of natural polymers, with the addition of glycerol as a plasticizer. The results of the spread of ZnO in bioplastics can be seen with SEM. Comparison of ZnO with Genus Metroxxlen Sp. starch 1-3% wt produced a strengthened mechanism characteristic from 0.40 kg/cm2 to 0.70 kgf /cm2; the change in the extension changed down from 120.4% to 99.00%. For glycerol composition with variations from 1-3% wt, the change in elongation changes to increase from 90.00% to 98.00%, the nature of the mechanism changes to decrease from 0.25 kg/cm2 to 0.20 kgf /cm2.

Author Biography

  • Khairun Nisah, UIN Ar-raniry
    departemen agama angkatan 2013

References

Avella, M. e. (2005). Eco-challenges of bio-based polymer composites. Materials.

Avella, Maurizio, Buzarovska, A., Errico, M. E., Gentile, G., & Grozdanov, A. (2009). Eco-challenges of bio-based polymer composites. Materials, 2(3), 911–925.

Avérous, L., Fringant, C., & Moro, L. (2001). Plasticized starch-cellulose interactions in polysaccharide composites. Polymer, 42(15), 6565–6572.

Beadman, H., Bond, Z., Campbell, D., & Thorpe, J. (2009). The UK Ocean Acidification Research Programme - Science Plan (2009-2014). Science, 2300, 1–19.

Carneiro, M. J., Fernandes, A., Figueiredo, C. M., Fortes, A. G., & Freitas, A. M. (2001). Synthesis of carbohydrate based polymers. Carbohydrate Polymers, 45(2), 135–138.

Jose M. Lagaron. (2011). Nanotechnology for bioplastics: opportunities, challenges and strategies. Food Science & Technology.

Jui Hung Chen. (2008). Synthesis of ZnO/polystyrene composites particles by Pickering emulsion polymerization. European Polymer Journal, 44, 3271– 3279.

Liu, Z., Song, Y., Shangguan, Y., & Zheng, Q. (2008). Simultaneous measurement of normal force and electrical resistance during isothermal crystallization for carbon black filled high-density polyethylene. Journal of Materials Science, 43(14), 4828.

Ma, F. C. (2009). Preparation and properties of glycerol plasticized-pea starch/zinc oxide-starch bionanocomposites. Carbohydrate Polymers, 75.

Onyon, P. F. (1972). Textbook of polymer science. Polymer, 13(12), 597.

Sun, S., Song, Y., & Zheng, Q. (2007). Morphologies and properties of thermo-molded biodegradable plastics based on glycerol-plasticized wheat gluten. Food Hydrocolloids, 21(7), 1005–1013.

Vigneshwaran, N., Kumar, S., Kathe, A. A., Varadarajan, P. V., & Prasad, V. (2006). Functional finishing of cotton fabrics using zinc oxide-soluble starch nanocomposites. Nanotechnology, 17(20), 5087–5095.

Wang, Z. L. (2007). Nanopiezotronics. Advanced Materials, 19(6), 889–892.

Downloads

Published

2020-01-07

Issue

Vol. 7 No. 2 (2019)

Section

Artikel

License

Proposed Policy for Journals That Offer Open Access Authors who publish with Lantanida Journal agree to the following terms: a. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal. b. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal. c. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).